The vertical speed in this phase can be selected by using the + / – buttons below the vertical speed indicator. When engaged, the autopilot will climb / descend to the target altitude and level off. Tap the altitude indicator to activate this mode. This mode is perfect for cruise flight at a constant altitude. The target heading can be changed while the heading mode is engaged, the autopilot will then turn the aircraft to the selected heading. Pressing these buttons repeatedly will change the selected heading by 5 degrees. The target heading can be changed by tapping the + / – buttons below the heading indicator. If no heading was selected, the current heading will be selected and shown in magenta. The box around the heading will change its color to green to indicate the heading is controlled by the autopilot. The heading hold mode can be activated and deactivated by tapping on the heading indicator. The target airspeed is shown in magenta at the virtual cockpit and can be changed by individually programmed buttons or keys. The airspeed mode / auto-throttle will adjust the engine power to keep the selected airspeed. The Pitch Attitude Hold (PIT) mode allows constant attitude climbs and descends. In this mode the autopilot will attempt to keep the wings level (ROL)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |